The conductive rod is used to connect the outgoing line of the transformer coil to the external high-voltage line and is installed on the top of the transformer. Generally, it consists of three sets of high-voltage conductive rods and four sets of low-voltage conductive rods. The external parts are insulated with magnetic bottle sleeves and sealed with an oil resistant rubber bead and an oil resistant rubber pad. Conductive rods can be divided into brass (copper grade HPb 59-1) conductive rods and copper (copper grade Cu T3) conductive rods according to their materials, and high-voltage conductive rods and low-voltage conductive rods according to their purposes. Generally, there are standard conductive rods and various irregular conductive rods for transformers below 40kV, as well as matching copper nuts, copper washers, wiring terminals, wiring blocks, copper standard parts, and non-standard parts. The characteristics include good conductivity, low resistivity, and can also be customized according to design drawings.
The conductive rod of the transformer is used to connect the outgoing line of the transformer coil with the external high-voltage line, and is installed on the top of the transformer. Usually consisting of three sets of high-voltage conductive rods
The low-voltage conductive rod is composed of four sets, each with a magnetic bottle cover on the outside
Oil resistant rubber beads and an oil resistant rubber pad are tightly sealed
Conductive rods can be divided into brass (copper number Pb59-1) conductive rods and copper (copper number CuT3) conductive rods according to their materials, and high-voltage conductive rods can be classified according to their uses
Poles and low-voltage conductive poles
Our company can produce standard conductive rods and various irregular conductive rods for transformers below 40k, as well as matching copper nuts, copper washers, and wiring terminals
Wiring strips, copper standard parts, and non-standard parts. Good conductivity and low electrical resistivity, users can also design and customize drawings
Brass and purple copper high-voltage conductive rod models.
The transformer conductive rod is used for connecting the outgoing line with the external high-voltage conductive rod, consisting of three sets of low-voltage conductive rods
Four sets of electric poles make up the exterior
Insulation of magnetic bottle sleeve
Oil resistant adhesive beads
Oil resistant rubber gasket sealing
Conductive rods can be divided into brass HPb59-1 conductive rods and copper (copper code CuT3) conductive rods according to their properties, and high-voltage and low-voltage conductive rods according to their uses
We can produce standard conductive rods and various irregular conductive rods for transformers below 4k, as well as matching copper nuts, copper washers, wiring terminals, wiring strips, copper standard parts and non-standard parts. Good conductivity
Contact: Tianjin Delda Trading Co., Ltd
WhatsApp: +86 13022268465
Tel: +86 13022268465
E-mail: solomon20210701@tjxddq.com
Add: 55-302 Xiaoyuan New Village, Tianjin Economic and Technological Development Zone, China