Silicon steel coil

Conventional silicon steel coil, with a conventional width of 980MM; Iron loss values: 70, 80, 110, 120 watts/KG; The lower the iron loss value, the better the quality of iron; The weight of a typical silicon steel coil is around 3-4 tons; The volume of a roll is estimated to be approximately 1 cubic meter, with a gross weight of around 4 kilograms per roll; The maximum weight of a container for sea transportation cannot exceed 25 tons, with 20-25 tons per container; Attention to the packing list of silicon steel coils: the details of the boxes can be divided by the freight forwarder;

Cold rolled SPC: Used for welding fuel tanks with a thickness of 1.2-1.5mm, a width of 1250MM, and 1500MM;

According to different production processes, electrical steel is divided into two types: hot-rolled and cold-rolled. Cold rolled electrical steel is divided into oriented electrical steel and non oriented electrical steel based on the orientation of the internal grains. The grains of oriented electrical steel are generally oriented in one direction, with a high silicon content, mainly used in transformer manufacturing; Non oriented electrical steel has a disordered grain distribution and low silicon content, mainly used in motor manufacturing.