Transformer sheath

The transformer sheath is used to prevent personal injury caused by exposed electrical contact points. This product is made of synthetic silicone rubber and subjected to HTV high-temperature vulcanization. This product is made of synthetic silicone rubber qualitatively by high-temperature vulcanization with HTV. The product design is reasonable, safe and reliable, and easy to use. And it has been tested and qualified by the National Electric Power Equipment Testing Center. Its performance meets the requirements of the national GB12168-90 "User Tools for Live Working" standard. Product performance: The transformer sheath is made of synthetic silicone rubber through high-temperature vulcanization, which never deforms, has high temperature toughness, and is tear resistant. The product has a lifespan of up to 50 years. Has good insulation performance, insulation strength greater than 20KV/mm, insulation resistance greater than 10. The product design is reasonable and easy to install. The buckle structure is easy to disassemble and reuse during maintenance. Dust and anti-theft electric functions

The transformer sheath is divided into three high voltage and four low voltage, with each set consisting of seven

Transformer insulation sheath product performance: The product is made of synthetic high-grade rubber vulcanized at high temperature, which will never deform. The product has a lifespan of 50 years and has good insulation performance. The insulation strength is greater than 20KV/mm, the insulation resistance is greater than 1000, and the flame retardant LOI is greater than 35%. The product is designed reasonably, easy to install, and the buckle structure is easy to disassemble and reuse during maintenance. The product is resistant to high and low temperatures, and can be used in the range of -60 ° C to 380 ° C. It is resistant to ultraviolet radiation, excellent hydrophobicity, and aging, meeting the long-term outdoor operation.

Product function: To prevent personal electric shock caused by exposed electrical contact points, and to prevent short circuits between phases caused by overlapping of foreign objects such as branches or crawling of small animals.