An introduction of oil drain valve

1.Use:

Put the oil can be used in the transformer fuel tank to open and closing the oil. In the actual needs of the transformer production plant, our company also designed two-purpose shutters according to the actual needs of the transformer production plant. This door is mounted in the lower part of the transformer, putting oil and oil samples.

2.Instructions for use:

  1. Work temperature: -35 ° C ~ 105 ° C;

  2, sealing performance: withstand the pressure of 0.5 MPa, 10min non-leakage;

  3, vacuum strength: under 32kPa, 10min leakage rate is less than 1.33palls; 4, mounting: Arrow direction should point to transformer oil discharge direction;

  5. Operation: The handwheel is left to the gateway; left-handed is open.