Pressure Relief Valve

  • Three Essential Oil-Protection Accessories for Transformers (For Export Only): Pressure Relief Valves YLSFF 10/20 + Oil Level Gauge YWJ 10 + Oil Drain Valve FYF 20
Three Essential Oil-Protection Accessories for Transformers (For Export Only): Pressure Relief Valves YLSFF 10/20 + Oil Level Gauge YWJ 10 + Oil Drain Valve FYF 20

Three Essential Oil-Protection Accessories for Transformers (For Export Only): Pressure Relief Valves YLSFF 10/20 + Oil Level Gauge YWJ 10 + Oil Drain Valve FYF 20

Product Overview

The oil conservator system of an oil-immersed transformer relies on three basic protection accessories: a pressure relief valve — when an internal fault causes a sudden oil-pressure rise, the valve opens automatically at the set pressure to relieve it and re-seals after the fault is cleared, protecting the tank; an oil level gauge — a glass-tube-and-float construction directly showing the conservator oil level, with red Min./Max. marks; and an oil drain valve — fitted at the tank bottom or conservator lower end for oil sampling and draining during maintenance. For export markets Tianjin Xingda supplies all three accessories in 4 models (drawing numbers XD.YLSFF.10.S / XD.YLSFF.20.S / XD.YWJ.10.S / XD.FYF.20.S), with G1" and G1-1/2" connections.

Customisation: the operating pressure of the relief valves and the tank-opening dimensions of every unit can be customised to customer requirements (as stated in the original catalogue); gauge head height H and total length L of the oil level gauge are matched to the conservator; float Φ22±0.5.

Drawing-number naming: XD.YLSFF (pressure relief valve) / XD.YWJ (oil level gauge) / XD.FYF (oil drain valve) – size code .S (export type, for export only).

Models & Specifications

Table 1 | Pressure relief valves (2 models)

Drawing No.ConnectionCap outer dia.Wrench size SWTotal heightCap heightThread sectionSignal terminalCap labelTank opening
XD.YLSFF.10.SG1"Φ55SW45~7225 / 32~40M5LABEL: DO NOT OPENΦ41
XD.YLSFF.20.SG1-1/2"Φ72SW50~72~32~40 (15)M5—Φ53.5

※ Cap-height column: model 10 has two segments (flange 25 / inner 32); model 20 is ~32. Operating pressure on request; spring + seal construction opens automatically on overpressure and resets after relief.

Table 2 | Oil level gauge (1 model)

Drawing No.ConnectionWrench size SWHead heightThread lengthFloat outer dia.Float heightIndicationTank opening
XD.YWJ.10.SG1"SW4582±216Φ22±0.546±1Glass tube + float, direct reading, red Min./Max. marksΦ41

※ Total height H and total length L are variable, matched to the conservator height (head ~H, lower connection ~L, 6 = reserve at the end); the float rises and falls with the oil level, read directly on the tube scale.

Table 3 | Oil drain valve (1 model)

Drawing No.Total heightTop outer dia.Base outer dia.Oil outletSeal-pin holeGroove sectionsTank opening
XD.FYF.20.S~76Φ41Φ46Φ30Φ34 + 4 (two)Φ31

※ Brass body with top-cover sealing, Φ30 outlet on the tank side; used for oil sampling and draining during maintenance.

How to Combine the Three

ApplicationRecommended setNotes
Standard 10–35 kV distribution transformersYLSFF.10.S + YWJ.10.S + FYF.20.SUniform G1" connections, openings Φ41/Φ31 — the most common combination
Larger power transformers, high oil volumeYLSFF.20.S (G1-1/2")Φ72 large cap, Φ53.5 opening, larger relief flow area
Fully-sealed corrugated conservators / complete export unitsThree-piece set + XS breather (open conservators)All accessories from one factory, fitted with the transformer in a single order
Special pressure classes / non-standard openingsCustomised on requestOperating pressure and opening size both customisable

Why Xingda

The pressure relief valve, oil level gauge and oil drain valve are XD self-manufactured transformer accessories (export series), with brass bodies and metal caps for reliable sealing: the relief valve is spring-type with automatic reset, the gauge reads directly on a glass tube with red alarm marks, and the drain valve has a double-groove quick-mount design. Operating pressure and tank-opening dimensions can be customised to customer drawings; together with XD bushings, breathers and off-circuit tap changers, all accessories for an export transformer are produced in the same factory and shipped in one consolidated package.


Contact Us

Contact: Tianjin Juyida Technology Co., Ltd

WhatsApp: +86 13662056855

Tel:

E-mail: solomon20210701@tjxddq.com

Add: Unit‑101, Workshop 3, Bozhong Automobile Industrial Park, No.5 Xianghui Road, Intersection of Xianghui Road and Gaoying Road, Beizhakou Town, Jinnan District, Tianjin, China